Easy Peanut Brittle Recipe (2024)

FAQs

Why didn't my homemade peanut brittle get hard? ›

The main reason why peanut brittle doesn't get hard and have the crunch we expect is because the sugar was not cooked long enough. The sugar needs to be cooked to what is called the hard crack stage, 300ºF.

Baking soda is also very important at this stage since it reacts to the heat, creating carbon dioxide that aerates the caramel, enabling it to snap when someone bites into it rather than requiring them to gnaw at it until it breaks or pulls apart.

If you have this issue, next time, use a thermometer to make sure the peanut brittle mixture gets to 300°F. Why is my peanut brittle light colored? That's because you did not heat the mixture up enough, and the sugars did not fully caramelize. This is what gives peanut brittle the beautiful golden brown color.

Lastly, avoid making brittle in a humid environment. The candy will attract moisture from the air, making it unpleasantly sticky instead of shatteringly crisp. Once it's completely cool, transfer it to an airtight container.

What Makes it Brittle? The sugar will be cooked to 300ºF (149ºC)—hard crack stage; which when set up would be hard like a lollipop. But peanut brittle is delicate and you can easily bite into it—how? The secret is in the baking soda.

Didn't combine ingredients right. Didn't get it hot enough. You have to hit hard crack stage heat or it's not going to harden.

If you overcook the brittle, it could be bitter or burnt. If you undercook it, the brittle won't properly set and the end result will be sticky. A thermometer is an accessible and inexpensive way to monitor temperature and ensure properly cooked brittle. Make sure your baking soda is fresh and active.

What's important to know is that the corn syrup controls the grain of the brittle so adding too little and you have a grainy textured brittle, while adding too much will result in a stringy and sticky brittle.

You will want the cookie sheet to be non-stick. Use parchment paper, a silicone baking sheet or a greased cookie sheet. Spread the peanut brittle as thin as you can. Immediately add your sea salt.

However, if you don't have a candy thermometer, it's still possible to make this sweet. All you have to do to find out if your peanut brittle is ready to be removed from the heat is to drop a bit of the syrup into cold water and see if it forms brittle strands. If so, you're ready to finish up your confection.

Why is my peanut brittle too thick? ›

As mentioned in “how to make peanut brittle”, it's very important to move fast after the peanuts and baking soda are mixed in. If not, the peanut brittle will turn out too thick and clumpy. Don't play the guessing game and use a candy thermometer instead. This will ensure your peanut brittle turns out perfectly golden.

I've learned that brittle is better when made on a cool, dry day. When I've made the candy on a warmer, humid day, it tends to be a stickier brittle. This is because the brittle takes longer to cool, and it reaches a point where it is no longer evaporating moisture into the air.

To store: Store peanut brittle (once it's completely cooled) in an airtight container at room temperature. Do not refrigerate as the moisture from the fridge will cause the brittle to soften. Store for 6-8 weeks. To freeze: Peanut brittle can be frozen and stored up to 3 months.

Heavy 6 quart Dutch Oven pot. Mine is an old 1970's Club Aluminum. It's perfect! You need a heavy THICK pot so it won't scorch.

She found that by boiling the peanuts before roasting them, that the peanuts acquired a firmer and crunchier texture that my Dad prefers. The peanuts are then slow roasted in the oven for a couple of hours, before letting them sit in the oven overnight with the heat turned off.

- Preheat your oven to a low temperature, around 250°F (120°C). - Break the stale peanut brittle into smaller pieces. - Place the brittle pieces on a baking sheet in a single layer. - Heat the brittle in the oven for about 5 to 10 minutes, checking frequently to avoid overcooking.

Don't try to spread the candy once it's on the baking sheet as it starts hardening almost immediately and spreading it doesn't work well. Let the peanut brittle cool for 30 minutes, then break it into pieces. Store it in an airtight container at room temperature for up to two months.

Peanut Brittle is a smooth, flat candy (similar to toffee), with peanuts in it, that is cooked on the stovetop and poured onto a sheet pan to cool. Once it cools it's broken into small individual-size pieces of hard candy and lasts at room temperature for several weeks.

The amount of time you cook fudge directly affects its firmness. Too little time and the water won't evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won't contain enough water, making it hard with a dry, crumbly texture.